GS2200 SYSTEM INCLUDES
The GS2200 is a medium to high volume SAR mask, APR mask and SCBA mask washer designed to scrub masks clean with a combination of complete water submersion, agitation, and soft scrubbing brushes. This machine will clean heavily soiled equipment without time consuming manual cleaning or soaking.
-
Cleaning, Disinfecting, and Rinse in one 35 minute cycle
-
Portable
-
Energy Efficient (120 Volts, 10 Amps, 60 Hz.)
-
Holds up to 20 half-face masks or 8 full-face masks per cycle
-
Stainless Steel Wash Tub
-
4 Water Levels
GUARANTEED
A one year parts and labor warranty, and compliance with ANSI, OSHA, and CSA Standards. The GS2200 incorporates a combination of the most effective disinfectant, and rinse chemistries to ensure the best automatic wash possible and protect workers against todays health threats. Guaranteed not to harm the facemasks of any respirator manufacturer
FLEXIBLE
The GS2200 features 4 Wash cycles, Normal, Heavy, Light, and Quick Wash. You may also select between 4 different load sizes to save water. Users select the desired cycle by simply pushing a button on the control panel.
INSTALLATION
-
5 foot 3 wire power cord on the top rear of the washer
-
4 foot flexible drain hose
-
Hot and Cold 3-foot flexible water intake hoses with 3/4 " female GHT near the top rear of washer
SPECIFICATIONS
Electrical
-
Power Cord: 5 foot
-
Plug: NEMA 5-15P 15 Amp
-
120 Volts, 50/60 Hz, 11 Amp, 1 phase
-
Connect to a 20 Amp breaker
|
Cycle Time
|
Water Supply
-
Two water inlet connection. One Hot and One Cold, both are 3/4"GHT
-
Water Pressure: 50 psi (Recommended) (Max: 75, Min: 40)
-
Water Temperature: User supplied (110° F recommended)
|
Capacity per Cycle
-
Full-face masks: 10
-
Half-face masks: 20
|
Drain
|
Pump Size
|
Dimensions
|
Water Requirements
|