|
 |
|
|
|
SCBA Containment
Fill Stations
|
|
|
|
|
|
|
|
|
|
BoomBox55™ Fill Stations and Air Control Panels
SCBA containment fill stations, equipped with basic air controls or air cascading gauges and panel valves, provide easy and precise control of the SCBA refilling operation. They also give you a greater number of SCBA cylinder refills than a bulk fill air control panel. Tilt out cylinder tray makes loading and unloading of cylinders easy. Plastic slides on cylinder trays protect cylinders from scuffing. Fill hoses are designed for easy connection inside the fill station.
Containment Fill Station - with Air Cascade Control Panel
30"w X 21"d X 70"h
- Fills one or two cylinders at the same time
- Panel supply gauges and control valves
- Compressor pressure gauge
- Regulator and outlet pressure gauge
- Large accurate 4.0" SCBA refilling gauge
- Two SCBA refilling control valves
- Air operated door safety interlock
|
|
|
|
Specify "Zip Nuts" for your fill hoses, for faster cylinder connecting and disconnecting.
|
|
|
|
|
|
|
|
BoomBox™ Fill Station - Basic 4500 PSI Stationary Models
Basic BoomBox™ includes a gauge and on/off valve for each SCBA connection. Units provide increased operator safety during the refilling operation.Featuring an air operated door safety interlock and tilting cylinder container make loading and unloading easy. Teflon slides on cylinder trays protect cylinders from scuffing. Fill hoses are designed for easy connection inside the fill station.
|
|
|
|
 |
|
|
|
For Stationary Applications
Up to 4500 PSI only
<<< AC70034S
Same specs. as the mobile units but with floor-mounting pedestal included.
|
|
|
|
 |
|
|
For Stationary Applications
Up to 4500 PSI only
AC70043S >>>
Same specs. as the mobile units but with floor-mounting pedestal included.
|
|
|
|
|
|
|
|
Click Here To View A Ruptured Cylinder!
|
|
|
|
Specify "Zip Nuts" for your fill hoses, for faster cylinder connecting and disconnecting.
CAUTION: Containment fill stations are designed only to contain cylinder fragments in the event the cylinder should rupture during the filling process. This will not stop the air blast of a ruptured cylinder. Install this unit vertically and allow 12" of open space between units and back wall.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
