|
|
|
|
 |
|
|
|
PopCan™ Stations are one step up from having no operator protection when refilling SCBA cylinders. Our PopCan carries an informal Class 4 rating. The primary function of the tube serves to hold round bottom cylinders in the upright position for added ease of air refilling. Sometimes referred to as Frag Deflectors, Frag Chambers or Fragmentation Chambers, these stations "may" provide a small measure of protection for the air refill operator, when refilling high pressure breathing air cylinders. Our Boombox containment fill stations provide much better operation protection. Call us now with your questions on fill stations needs.
|
|
|
|
|
PopCan™ Station - Tube Only
Part # AC70010
$310.00
-
- • Class 4 fill station
- • Weight - 37 pounds
- • Height - 18.0"
- • Outside Diameter - 9.5"
- • Internal Diameter - 8.0"
- • Wall Gauge - .75"
- • Material - Aluminum Tube
|
 |
|
|
|
PopCan™ Station
|
|
CAUTION: Fragmentation deflecting products, by their design, do not provide complete operator protection. These products may help direct some of the blast of a ruptured cylinder upwards, as opposed to outward, and are better than having nothing to place your cylinder in for refilling. This product may provide some additional operator protection but it will neither stop cylinder fragments nor the air blast of a ruptured cylinder. Do not install directly below or above an occupied area. For added operator safety, the operator should never lean or reach over the container during the filling process. Units should only be installed vertically. |
|
|
|
|
PopCan™ - Single Unit
Part # AC70020
$660.00
- • Class 4 fill station
- • Dimensions - 12" x 12" x 24"
- • Weight - 55 pounds
- • Height - 18.0"
- • Outside Diameter - 9.5"
- • Internal Diameter - 8.0"
- • Wall Gauge - .75"
- • Material - Aluminum Tube
- • Custom modifications available
|
|
 |
|
|
|
|
PopCan™ - Double Unit
Part # AC70030
$1206.00
- • Class 4 fill station
- • Dimensions - 24" x 12" x 24"
- • Weight - 100 pounds
- • Height - 18.0"
- • Outside Diameter - 9.5"
- • Internal Diameter - 8.0"
- • Wall Gauge - .75"
- • Material - Aluminum Tube
- • Custom modifications available
|
|
 |
|
|
|
|
|
|
|
|
|
|
|
|
